Thread: Propane GPH?
View Single Post
Old 06-13-2013, 11:51 AM
mrlpg's Avatar
mrlpg mrlpg is offline
Join Date: Jan 2013
Location: US
Posts: 17
In hearing those numbers, I would say that when the system was converted, proper calibration was not properly performed. It is running too rich. We have seen 9 hour run times on a 33# cylinder that is filled to 80% (7.9 gallons).

We have seen a comparison that is pretty close. GPH for gas at .6566 and propane .709
Reply With Quote
Page generated in 0.03376 seconds with 8 queries