View Single Post
  #3  
Old 06-16-2013, 10:33 AM
bcg bcg is online now
LawnSite Bronze Member
 
Join Date: Mar 2005
Location: Tx
Posts: 1,779
If you haven't, remove the common wire from the controller in addition to the zone you're tracing. This will help to keep your signal from jumping to the electrical ground and keel it a little cleaner on the zone wire. Once you get to the end of the utility interference, if you can't pick the signal back up right away, start making 1/2 circles from that point out. This part of locating becomes more art and finesse than anything else, experience makes it easier so stick with it, keep trying different things until you find it again and then remember what worked for next time.
Reply With Quote
 
Page generated in 0.03179 seconds with 7 queries