View Single Post
Old 06-21-2013, 11:32 PM
Breezmeister's Avatar
Breezmeister Breezmeister is offline
LawnSite Bronze Member
Join Date: Jul 2007
Location: South Jersey
Posts: 1,401
Originally Posted by BigFish View Post
It looks to be pretty much just an industrial gearbox. Give your local power transmission/bearing house a call.
Just sent off an e-mail with those pics to Applied Industrial Tech Inc.. They used to be Bearings Inc at one time. I had completely forgotten about them, Good Idea !

Originally Posted by BigFish View Post
Or GOOGLE the numbers and see what ya get.
Tried that last night, no joy there..

Originally Posted by BigFish View Post
One thing I noticed. The endplate/bearing carrier is gonna have to come off(obviously). If yer lucky, the bearing might come out with the shaft, in which case all ya gotta do is cut/remove the sprocket. If not, yer gonna have to do a lot of cleaning up to get the shaft thru the bearing. Good luck!
Getting the sprocket off shouldn't be a problem, been putting a few drops of Dexron on it every day. But that stuff stinks ! And I have a roll of emery paper. When I have a few free hours, that shaft will shine......
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
Page generated in 0.03389 seconds with 8 queries