View Single Post
  #2  
Old 07-15-2013, 02:46 AM
Breezmister's Avatar
Breezmister Breezmister is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,181
Quote:
Originally Posted by ed2hess View Post
I know scag spindle will fit and I can get aftermarket. I researched once and found one scag spindle that would fit w/o modification, lot info
I have been looking into replacing the spindles on the Lesco WB because I can no longer get the parts to rebuild them and the Scag spindles seem to fit the bill. They are different from the ones you need, they only have a 1 inch shaft and take the same bolt. Here is a link to what Stens sells in your size, a little more info.....

http://www.stens.com/Portal.aspx?CN=89739E31F846

As long as the height and shaft size are correct I'd go for it. Only Stens is out there on their price as well......
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
 
Page generated in 0.03509 seconds with 7 queries