Thread: Blowout 52" RH
View Single Post
  #41  
Old 07-26-2013, 11:19 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 508
Cut It Close,

Now that the baffle is in the deck which blades are you running in the deck? The older decks with the baffle would usually perfrom the best when the blade height is half above the baffle and half below which should be the set with the two spacers. Removing one spacer is okay you just don't want the whole blade up in the baffle, remember that the cut height will be 1/4" higher then the system indicator.

Best Regards
Wrigth Mfg.
Reply With Quote
 
Page generated in 0.03851 seconds with 7 queries