View Single Post
  #7  
Old 07-30-2013, 05:35 PM
Tizzy Tizzy is offline
LawnSite Senior Member
 
Join Date: Jul 2011
Location: Connecticut
Posts: 363
i'll drop some knowledge on you.

this is a low kickback semi chisel chain (will have 1 green link on the chain)


low kickback full chisel chain


notice how both the above have what looks like 2 rakers per cutter. this prevents kickback. the top one also has a round edge on the side of the teeth that makes it a semi chisel. the second has a square edge that is full chisel.

this is a Standard Full Chisel Chain (notice the yellow link, this means it is not low kickback)


this chart shows the cutter spacing



hope that helps you with chain identifications.

also you should learn how to sharpen the chain properly. you can get a lot of life out of the chain. also it is a lot better for the saw and bar to keep the chain sharp. also without experience chainsawing i would not recommend getting the standard chains stay with low kickback.
Reply With Quote
 
Page generated in 0.03787 seconds with 7 queries