View Single Post
  #3  
Old 08-26-2013, 01:47 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
Ditto....Fish...

Just assemble the engine using the oil you are going to run in it..
To prime the oilpump and the rest of the engine....
Fill the engine oil to the proper level ..
Disconnect the sparkplug wires..
Crank the engine for 10 to 15 seconds....3 or 4 times...
Check the oil...it should be low now....
Add engine oil to get to the proper level..
Reconnect sparkplugs...fire it off..

There is no break in period on a rebuilt engine..
Tune and adjust the engine to the desired specs.
Change the motor oil and filter after 8 to 10 running hours...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work

Last edited by piston slapper; 08-26-2013 at 01:52 PM.
Reply With Quote
 
Page generated in 0.04766 seconds with 7 queries