View Single Post
  #25  
Old 08-30-2013, 11:36 AM
kawakx125 kawakx125 is offline
LawnSite Senior Member
 
Join Date: Apr 2012
Location: lees summit, mo
Posts: 945
Quote:
Originally Posted by WrightCommercial View Post
kawakx125,

Correct, that is why the baffles help in the discharge velocity by helping to keep the air in the deck. One of the issues the baffle also helps with is the air turbulance between the chambers at the front of the deck when the blades pass each other. In those two areas the blades are passing each other in the opposite direction so while the blades are all spinning in the same direction when they pass each other the air flows are in the oppsite direction. The baffles help in limiting the size of this area to limit the turbulance. Blade placement also comes into play, too high and it can over pressure the deck and too low can cause too much air to escape under the baffle.

Best Regards
Wright Mfg.
so what happens when the deck is over pressureized? i took one spacer out yesterday and it greatly reduced blowout, thinking one more might do the trick to eliminate it
Reply With Quote
 
Page generated in 0.03218 seconds with 7 queries