View Single Post
Old 08-30-2013, 04:42 PM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 522

The most common thing is blowout on the side of the trim chamber since it is furthest from the discharge. Usually shows up as a few inches of grass not being cut on the edge of the trim chamber. One more spacer out will basically be the relationship the previous deck had between the baffle and blade, keep an eye on the area of the cut where the drop down sections on the baffle are to make sure with the new blade set they are still being cut correctly.

Best Regards
Wright Mfg.
Reply With Quote
Page generated in 0.03222 seconds with 8 queries