Originally Posted by RSLM&LS
Gotcha. I had the guard break on my Shindaiwa trimmer and to cut the dull/too long ends of the string had to hold a knife by the string with it going. If you need to cut the string what's your method?
You Can do it on sides or corners of buildings, or the side walk Just flip that thing up side and hold it to where the string is just touching the concrete with the string spinning of course.
“Life takes on meaning when you become motivated, set goals and charge after them in an unstoppable manner.”
"There is no such thing as failure. There are only results." – Tony Robbins