Originally Posted by xtreem3d
This is what we do with our lights that mount under caps on block walls and I would try this. Take the color paver you would like the cover to be and crumble it into sand particles, rough up the cap with sandpaper, wire brush ect to get the "gloss" off, we use 5 minute epoxy but with a bigger cap like in your description i would use 15 or 30 minute...brush the epoxy onto the cap then sprinkle the paver dust onto the epoxy and let it dry. We don't do this with our under mount lights but you could then thin another batch of epoxy and "clearcoat" the cap. It might be better to try on a sample cap first to test the appearance.
Good Luck...stuff like that on a job really "bumbs" me when I know it hurts the final look of the project,
For future reference they make lids with a recessed top for stamped concrete and pebble-tec applications
Posted via Mobile Device