View Single Post
Old 09-18-2013, 10:42 AM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 524
Cut It Close,

Not sure why you are getting a 2.5" tip measurement when at 3" on the lift system especially since the blade is a spacer higher then the normal set. Where are the black C spacers in the caster yoke assembly positioned? The stock set is one between the yoke and caster arm and one on top of the caster arm tube below the pin.

Best Regards
Wright Mfg.
Reply With Quote
Page generated in 0.03608 seconds with 8 queries