View Single Post
  #6  
Old 10-03-2013, 12:08 PM
Blade Runners's Avatar
Blade Runners Blade Runners is offline
LawnSite Senior Member
 
Join Date: Apr 2012
Location: Woodlawn, TN
Posts: 913
Hooking up lights is very simple. You can use any switch like a toggle or rocker switch. I run the wiring to the switch then straight to the battery. Mount the switch on your control panel or somewhere convenient. A toggle switch only requires 1 hole to be drilled and you can get toggles that light up when the power is on.

My son likes wiring up stuff so he done these for me because I am away from home right now.

These would work good on the TT control panel. I use the same switch as a nitrous activation switch on my racing quads. You only drill 1 hole to mount it and it looks clean and professional when you are done. Red LED Light Carbon Fiber CAR Automotive Illuminattoggle Spst Toggle On/off Switch Button
__________________

Scag mowers
++++++++++++++++++++++++++
www.ClarksvilleLawnCare.us

"Always do your best. What you plant now, you will harvest later."
-Og Mandino
Reply With Quote
 
Page generated in 0.03874 seconds with 7 queries