View Single Post
  #48  
Old 10-07-2013, 06:09 PM
1idejim's Avatar
1idejim 1idejim is online now
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 6,834
Quote:
Originally Posted by irritation View Post
Not only do you have to manually open the master valve but bleed any air from the main and wait for the pressure test.
You can fire the furthest valve for 1 minute from the controller, power off the clock, remove the common and MV wires. Connect a stationmaster to those wires and actuate the MV with all zones shut. Look at the meter until you are satisfied and hook the 2 wires back up. Then you can have a beer!!!!

Posted via Mobile Device
Reply With Quote
 
Page generated in 0.03290 seconds with 7 queries