View Single Post
  #32  
Old 11-09-2013, 04:10 PM
YellowDogSVC's Avatar
YellowDogSVC YellowDogSVC is offline
LawnSite Gold Member
 
Join Date: Oct 2006
Location: TX
Posts: 3,560
Quote:
Originally Posted by AWJ Services View Post
The Ex you have will not make 19gpm at 3000 rpm. The 19 gpm will be at a much lower pressure. Your engine makes 42 hp. Assume min 80% loss efficiency from pumps and that leaves 33 max available too the whole machine ao unless Bobcat has figured something out nobody else has your machine cannot have 33 hp available at the aux circuit, Your machine will have about 19 hp available real world.
specs say 19 at auxiliary at 3000 psi. 26 gpm on the rest of the system. My Bobcat is only 85 hp but puts out 37 gpm at 3500 psi confirmed on flow meter. My mulcher is rated for between 35 and 40 gpm and it's performance is spot on for what it should be. The skids specs are roughly double what the ex specs are and it also has power to move and lift a 2650 lb attachment without much rpm loss to my cutter. Somehow it works.
__________________

"Life is tough, but it's tougher if you're stupid."

Twitter @Cedar_Clearing
Reply With Quote
 
Page generated in 0.04277 seconds with 7 queries