View Single Post
  #33  
Old 11-09-2013, 08:42 PM
AWJ Services AWJ Services is offline
LawnSite Platinum Member
 
Join Date: Jun 2004
Location: Ga
Posts: 4,263
Quote:
Originally Posted by YellowDogSVC View Post
specs say 19 at auxiliary at 3000 psi. 26 gpm on the rest of the system. My Bobcat is only 85 hp but puts out 37 gpm at 3500 psi confirmed on flow meter. My mulcher is rated for between 35 and 40 gpm and it's performance is spot on for what it should be. The skids specs are roughly double what the ex specs are and it also has power to move and lift a 2650 lb attachment without much rpm loss to my cutter. Somehow it works.
Specs actually say 19 gpm and then it says pressure 3000 psi. It does not say 19gpm at 3000 psi.

I will add that if your skid makes that then it is a stellar performer. What type of flow meter did they use to test it ?
Reply With Quote
 
Page generated in 0.03172 seconds with 7 queries