View Single Post
Old 12-05-2013, 12:44 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,446
Winter run down - lots of stuff - lots of pics

Selling a ton of stuff as we modify our business plan
484-880-068four - my name is chip and phone calls are preferred vs texting

Start with the little stuff

- stihl br600 x3 - $350, 300, and 250 based on age 2006-2010. All work great but the oldest has the top loop broken off on the backboard. Looking to sell 2 and replace them with redmax/husqvarna blowers for leaves. These are great blowers. Light and pretty easy on fuel with lots of power but the stats say redmax moves more air so we are giving them a shot

- echo 280 bed redefiner with trimmer head also $500. very little use, new carb

- gravely ocdc that fits 52 and smaller decks $175

Bigger stuff

- 2007 scag turf tiger 27/61 velocity deck $3500 under 2000 hours

- 2001 scag turf tiger 25/61 1/2 year advantage deck with ultracut style baffling $3000 under 2000 hours

- 2010 hustler super z 31/60 with triple bagger $6500 1300 hours and in good shape. pic shows small tires but it will come with the stock size 24x12x12 with good tread

- 2012 gravely new style pro stance 22/52 (24hp old rating) with very low hours and in excellent condition $4800

- 2013 gravely proturn 24/60 $5400 very low hours and in excellent condition

- 2013 gravely proturn 272 27/72 $8500 under 100 hours and in excellent condition

- 2004 husqvarna 27/61 ztr hasn't been used in years but engine was good when parked. Jerky hydros were the problem that stopped us from using it. $2000 obo

- exmark 48 inch belt drive walk behind with seized engine (14hp kawi I think). Has a peerless 5 speed trans so I believe it to be mid90's $250

- snapper 15/36 hydro walk behind with ergonomic controls and bagger $1000 excellent condition

- yazoo kees 18/48 ztr $1000 needs ignition and pan gasket replaced

- encore prowler front mount 60inch. We used the 22hp kohler to re-power a miniskid so it needs a motor or good for parts. Hydros, clutch, etc were all functioning perfectly $600

- lesco z2 25/60 parts machine. $500 has engine, pumps, and deck but we stole the wheel motors, seat, and tires for other machines over the years. About 1000 hours on the meter

- scag 3-wheel rider belt drive been sitting for years and needs miscellaneous parts and a tire or two $250 2500 hours on the meter 18hp kohler magnum


- 99 dodge cummins 4x4 quad cab 150k $10,000 firm

- 94 dodge 250 with fisher plow rusted out rear truck frame $1500 firm

- 00 gmc sierra 2500 6.0 4x4 160k $7500 firm -

- dumper dogg insert new this year for $2500 firm with cab protector and board pockets

- 78 international loadstar dt466 5+2 10ft dump $3500 firm

- 78 f350 mason dump needs ring and pinion (pinion shaft broke). Good 400m with np235. good rubber $1800

- 79 c30 gmc with 8ft all steel dumping stake needs fuel line replaced and misc little stuff $1500 350 4spd

- 99 f250 superduty 5.4 auto 2wd high miles (285k) runs great $2700

pics to follow as time permits
Reply With Quote
Page generated in 0.04091 seconds with 8 queries