Thread: scrap or sell?
View Single Post
Old 01-19-2014, 03:26 PM
Valk's Avatar
Valk Valk is offline
LawnSite Silver Member
Join Date: Dec 2007
Location: Eastern KS
Posts: 2,718
Biggest issue with this era SR-21s IMHO ~> is that they only cut up to 3" high max.

See if the cutting height adjustment slots in the deck are toast. IOW, does the mower jump to a lower cutting height on uneven ground? If so, the problem is in the deck itself, unfortunately.
There's an adapter plate from Toro to fix this, BUT it prohibits the cutting height from mowing higher than 2.5"... = not good.

The other weak point is the tranny...assuming it is self-propelled.

Definitely not worth investing any more than ~$70-$80 into to get it working as a backup...assuming you'd even want it.
~ cut it high ~ let it fly ~
Some folks are so contrary that if they fell into a river,
they'd insist on floating upstream.
~ Josh Billings
Reply With Quote
Page generated in 0.03638 seconds with 8 queries