Thread: scrap or sell?
View Single Post
  #7  
Old 01-19-2014, 08:08 PM
Townhouse Yards's Avatar
Townhouse Yards Townhouse Yards is offline
LawnSite Senior Member
 
Join Date: Jun 2013
Location: Vienna, VA
Posts: 354
Quote:
Originally Posted by Valk View Post
Biggest issue with this era SR-21s IMHO ~> is that they only cut up to 3" high max.

See if the cutting height adjustment slots in the deck are
toast. IOW, does the mower jump to a lower cutting height on uneven ground? If so, the problem is in the deck itself, unfortunately.
There's an adapter plate from Toro to fix this, BUT it prohibits the cutting height from mowing higher than 2.5"... = not good.

The other weak point is the tranny...assuming it is self-propelled.

Definitely not worth investing any more than ~$70-$80 into to get it working as a backup...assuming you'd even want it.
.02
Thanks for the reply. It is not a self propelled, it is a push. The height adjustment does move ok, but you have to really tug on it to move it. I don't want it anymore.
Posted via Mobile Device
Reply With Quote
 
Page generated in 0.03797 seconds with 7 queries