View Single Post
  #31  
Old 01-20-2014, 09:02 PM
Jeff in AL's Avatar
Jeff in AL Jeff in AL is offline
LawnSite Senior Member
 
Join Date: Jul 2000
Location: Alabama
Posts: 405
Tightening the screw on what "back cover"? The cam cover or the rewind assy.?

You should have a plug or two around for any and all your equipment, just in case...

Using the EDTA usually doesn't harm the plug unless you don't drain it all out of the cylinder and it gets the plug wet.

It is possible that after using the EDTA that you may "carbon foul" a plug... Which means there is a small piece of carbon on the plug electrode and is grounding the plug out... Either remove the carbon that is fouling the plug or replace the plug.
__________________
Jeff in AL

How very observant of you there captain obvious.

The amount of FREE information that you receive here will be directly proportional to the amount of information that you provide!
Reply With Quote
 
Page generated in 0.04835 seconds with 7 queries