View Single Post
Old 01-24-2014, 06:29 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Silver Member
Join Date: Jul 2008
Location: chesapeake, va
Posts: 2,203
For stripped non critical screws/bolts, I usually just insert a small nylon cable tie thru the cover and into the threaded hole and insert screw. Then snip off excess if it doesn't cut/pinch itself off. Works great on coarse plastic screws.
I have also used a piece of small guage insulated wire, same deal.
It ain't rocket science! far.
" Pay no attention to that man behind the curtain! "

Reply With Quote
Page generated in 0.04671 seconds with 8 queries