View Single Post
  #90  
Old 02-25-2014, 12:16 AM
turfmd101 turfmd101 is offline
LawnSite Senior Member
 
Join Date: Aug 2012
Location: orlando fl
Posts: 482
I need to correct my last post of 14-0-14. It was over a decade ago. Here is the blend.
LESCO® TURF FERTILIZER WITH MICRONUTRIENTS ICRONUTRIENTS 19-2-19 19-2-19 For use in Rotary Spreaders Only 22.7 kg COVERS 957 square meters DIRECTIONS FOR USE: This LESCO product is a turf fertilizer for use on all lawn areas. The best results with this product are obtained when it is applied to actively growing grass, and watered into the turf soon after application. Avoid mowing immediately following application to prevent pickup. GUARANTEED MINIMUM ANALYSIS TOTAL NITROGEN (N) …………………………………...19.00% 1.80% Ammoniacal Nitrogen 3.20% Urea Nitrogen 8.60% Water Insoluble Nitrogen* 5.40% Other Water Soluble Nitrogen* AVAILABLE PHOSPHATE (PO)……………………….2.00% CAUTION: This product contains iron and should only be used as recommended. It may prove harmful if misused. 25 SOLUBLE POTASH (KO).........................................................19.00% 2 SULPHUR (S)...............................................................................8.60% 8.60% Combined Sulfur (S) Sweep or blow the fertilizer off walks and painted surfaces following application to avoid discoloration. Recommended applications are at the rate of 0.225 kg and 0.45 kg of nitrogen and potash per 100 square meters. Actual rate and timing of application will vary with weather, soil and turf conditions. Please refer to provincial turf guidelines. This product is intended to be used as part of complete lawn feeding product For additional product assistance, call LESCO, Inc. in Cleveland, Ohio at 1800-321-5325. COVERAGE: 22.7 kg of LESCO 19-2-19 Fertilizer covers approximately 957 square meters at the application rate of 0.225 kg and 0.45 kg of nitrogen and potash (2.37 kg of fertilizer) per 100 square meters. ROTARY SPREADER SETTINGS: Apply LESCO Fertilizers and Combination Products only with a rotary spreader. The following rotary spreader settings are approximate for the application rates of 0.225 kg and 0.45 kg of nitrogen and potash per 100 square meters. You may need to adjust the setting depending on walking speed, spreader condition and product. SETTINGS K2O/100 sq meters ROTARY SPREADER LESCO alibration Gauge C SCOTTS® R8A Cyclone® or Spyker® LESCO Pendulum Lel y® 0.225kg 0.45kg #10 #13 H 3 16 3 I˝ 3˝ 20 3˝II IRON (Fe) Total.............................................................................2.50% 1.00% Water Soluble Iron (Fe) Ingredients: Methylenediurea, Dimethylenetriurea, Urea, Ammonium Phosphate, Ammonium Sulfate, Sulfate of Potash, Iron Oxide, Iron Sulfate. *14.00% Slowly Available Urea Nitrogen from Methylenediurea and Dimethylenetriurea. F1560
Posted via Mobile Device
Reply With Quote
 
Page generated in 0.04038 seconds with 7 queries