Thread: Finding Sleeves
View Single Post
Old 03-05-2014, 03:37 AM
RhettMan's Avatar
RhettMan RhettMan is offline
LawnSite Bronze Member
Join Date: Dec 2000
Location: Texas
Posts: 1,794
Originally Posted by bobw View Post
IC - You've got the essence of my problem;

So, if I understand correctly, you're running the pipe to fill the sleeve and/or control wire as well when you install the sleeve. Then you stub up several feet so that it's above grade. Eventually come back and cut the stub down to the correct depth under surface.

Love everything about it other than we'd never be able to back charge when they go missing, and then we'd be out more $ when we can't find them and/or they're destroyed.

I'm going to have to think hard on this... I definitively like the approach tho.

Rhett- a bobcat, 20 acres of dirt, maybe some building foundations, maybe not. A big thing around here is to get the parking lots paved before winter so that construction traffic doesn't have a mud issue on city streets.
SO THATS how they did target?....that must be some durable pipe, certainly not regular old regular pipe?

if this is to happen, a perfectly synced concrete and irrigation contractor would be key, perhaps even use the same GPS system?
!Ta loco!

are these two wire systems? taking wild guess, i dont understand two wire myself but this type of application it would be ideal it seems,
i mean: the two wire part?

I would really like to see a picture of what your calling a sleeve. (your favorite setup)
Reply With Quote
Page generated in 0.03966 seconds with 8 queries