View Single Post
Old 04-15-2014, 04:59 PM
Breezmeister's Avatar
Breezmeister Breezmeister is online now
LawnSite Bronze Member
Join Date: Jul 2007
Location: South Jersey
Posts: 1,422
Originally Posted by Oli View Post
Added 2-cycle oil to the cylinders of both units as described by Breezmister and checked the compression. Pressure increased to 105 psi on the trimmer, and 120 psi on the edger.
At this point, with those numbers, I would put in new fuel lines and filters and see if you can get them to start. Now you will find out if the carbs are any good.....
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
Page generated in 0.03370 seconds with 8 queries