View Single Post
Old 04-21-2014, 06:31 PM
streamlight2 streamlight2 is offline
LawnSite Member
Join Date: Jun 2010
Location: midwest US
Posts: 28
Got the clutch removed and checked the air gap between the rotor and armature at the three windows and there is no gap at all. Used a 9/16 wrench and loosened the three nuts 3/4 turn, but didn't make a difference. Also measured the ohms at the clutch plug and got 4.1 Since the rotor and armature are stuck together, does that mean the clutch is bad?
Reply With Quote
Page generated in 0.03436 seconds with 8 queries