View Single Post
Old 06-05-2014, 08:20 AM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 522

The only thing on the mower that will prevent cranking is the brake start interlock, when the brake is applied a paddle pushes a switch in to complete the circuit for the starter solenoid, make sure the green wire is hooked to the switch between the pumps and at the solenoid. Also make sure the fuses are good.

Best Regards,
Wright Mfg.
Reply With Quote
Page generated in 0.03714 seconds with 8 queries