View Single Post
Old 06-15-2014, 10:28 PM
s9496 s9496 is offline
LawnSite Member
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
Service Manuals

I have done some test cuts and noticed a strip between the center and left blade that cuts ragged, The deck is clean and I decided to remove the deck and check the spindles. I first thought the bearings on the right spindle were gone but closer checking found the nut was loose bearings and races look good. The manual is needed to check all specs to determine the cause of the poor cut.
Reply With Quote
Page generated in 0.03301 seconds with 8 queries