Originally Posted by Skipster
Sounds to me like you used the wrong surfactant. The ProSedge label calls for only non-ionic surfactant containing no less than 80% active material. Using MSO can injure turf.
Although the Celsius label says MSO is acceptable for use, Iíve seen phyto from that combination, too.
I think the lesson is pretty clear here: donít use MSO unless the label specifically calls for it. If youíre not spraying Drive, you probably donít need MSO.
The discolored spots should recover, but donít fertilize them Ė that will just make it worse. Give them enough water so they wonít dry out and youíll see improvement in a couple of weeks.
I don't even use MSO with Drive XLR8, only a non ionic, and it works to perfection. When in doubt, be conservative with your adjuvants.
7x14 Stealth SE Enclosed with 48" side ramp
08 Toro Z400 48" deck, 21HP Kaw with EZ Vac twin bag
09 Exmark Turf Tracer HP 36"
21" Toro SR4 Super Recycler
Stihl KM90 Kombi w/ straight shaft trimmer & tiller heads
Husqvarna 125B Blower
Turfco XT5 Aerator
Turfco LS-22 Overseeder
I can do all things through Him who gives me strength.