View Single Post
  #31  
Old 07-07-2014, 06:16 PM
bcg bcg is online now
LawnSite Bronze Member
 
Join Date: Mar 2005
Location: Tx
Posts: 1,779
Quote:
Originally Posted by Mike Leary View Post
A plastic cycle stop is a good idea, never used one, I know they are cheap. I had no idea it needed to vent. What I always used were: http://cla-val.com
Yeah, they create some back pressure on the pump that will vent out the release valve. It will dump a fair amount of water so you want to put it somewhere that can handle it or you'll end up with a lot of standing water. It can be a pain to find a good spot to drain it to but it is less of a pain than replacing a well pump.

The CSV is about $100 +/-, depending on the size and pressure. If that well pump is cycling from 45PSI - 75PSI, I'd get a 60PSI CSV and nozzle my heads to take full advantage of that.
Reply With Quote
 
Page generated in 0.03797 seconds with 7 queries