View Single Post
  #5  
Old 11-07-2000, 09:07 PM
mike reeh mike reeh is offline
LawnSite Member
 
Join Date: Oct 2000
Location: san diego
Posts: 229
no no no!!! Id bet money that its the front-axle ujoints.. put it in neutral, lock the hubs if you have em then turn the front driveshaft back and forth by hand and watch the axle ujoints very carefully..

My last truck was a '77 np203 truck and it did exactly what you described, very badly, and that was it.. luckily my current '77 np203 had the part time conversion installed in the t-case and the whole driveline is *tight*

good luck and keep us posted

mike reeh
michaelr@cts.com
Reply With Quote
 
Page generated in 0.03833 seconds with 7 queries