View Single Post
Old 10-15-2004, 06:05 PM
riches139's Avatar
riches139 riches139 is offline
LawnSite Senior Member
Join Date: Aug 2003
Location: Hartville,Ohio
Posts: 369
I guess mine will work somewhat similar.

I will use a machinist cross slide vice to move blade back and forth, side to side.
Motor and wheel will be mounted 30 degrees to the horizontal plane.
Initial height adjustment will be with new wheel, as wheel wears thin shims can be added under blade to increase height.I can also use an adjustable motor mount to change height, but will increase cost.

Blades for my M60 Tank and walk behind are virtually straight, so I intend to end up with a "factory" quality grind.
Cub M60 Tank
Wright Stander 36" RH
Cub G1336 WB w/sulky
Cub 21"
Lawnboy 21"
Cub trimmers
Cub hedge trimmer
Cub chain saw
Poulan chain saw
Stihl hedge trimmer
Kawasaki blower
Homelite handheld
Southwest 7x16 Enclosed
"04" F150 5.4 8' bed
Assorted other moneymakers
Porti Potty (very important)
Reply With Quote
Page generated in 0.03794 seconds with 8 queries