View Single Post
  #3  
Old 11-01-2004, 06:51 PM
Travis Followell's Avatar
Travis Followell Travis Followell is offline
LawnSite Silver Member
 
Join Date: Sep 2004
Location: KY
Posts: 2,207
if the belt is tight and enguages properly then you might have a problem with the wheels. Pick the rear of the mower up and see if the drive wheels will spin freely. If they will then that is your problem because the power from the axle is not being transmitted to the wheels because the wheels will just spin on the axle. They are supposed to spin with the axle. If they will spin with the axle as they should then the transmission is probibly shot. A new one is around $200 so you will be better off just making a push mower out og it or finding a junked one that you can get a trans. off of.
Reply With Quote
 
Page generated in 0.03971 seconds with 7 queries