Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2008, 10:54 AM
TheBigGW TheBigGW is offline
LawnSite Member
 
Join Date: Sep 2007
Location: MA
Posts: 151
Info on my stander i bought used

Just curious as to how many grease fittings i should be looking for i bought a 2007 23kaw 52 cut i have found 4 total on front casters and 2 under the deck lid were the belts are. Can you tell me how many more there are if any. Also can you tell me the rite hydro filter and number needed so i can change it thanks.
__________________
2003 F-250 4X4
1997 F-350 4X4 7.3 turbo
2008 52" Stander RH
2007 52" Stander
MANY MANY other tools
Hand and Power....
Reply With Quote
  #2  
Old 06-18-2008, 10:56 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 507
TheBigGW,

You should find one more grease fitting on the idler arm of the drive system under the engine deck. The part number for the filter available at our dealers is 34490002, if you look aftermarket, besides the fit to the filter housing make sure the filtration level is 25 micron.

Best Regards
Wright Mfg. Service Department
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:06 PM.

Page generated in 0.07122 seconds with 7 queries