Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 05-06-2012, 06:10 PM
Skier125 Skier125 is offline
LawnSite Member
 
Join Date: Sep 2011
Posts: 9
Drilling Holes in Deck

I want to mount a bracket to the back of my mower's deck it is a lesco wb 48. So I was wondering if theirs any major reason why i shouldn't drill the holes. The holes will be were the belts are or were the blades are. I need the brackets to attach the the striping kit. Should I do this or try mount on the back near the operator instead which is a better idea.
Thanks for the help I wanted to check first so i only drill once.

The striping kit http://www.lawnsite.com/showthread.p...nveyor+Rollers
Reply With Quote
  #2  
Old 05-06-2012, 08:39 PM
fixer67's Avatar
fixer67 fixer67 is offline
LawnSite Silver Member
 
Join Date: Apr 2004
Location: Tryon NC
Posts: 2,161
I would put the heads of the bolts on the under side as the heads will not catch grass build up like a nut and bolt sticking down would.
__________________
"DEFECTIVE OWNER/OPERATOR NOT COVERED UNDER WARRANTY"
Reply With Quote
Reply

Tags
drilling , holes , lesco , mower deck , striping

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:08 AM.

Page generated in 0.05110 seconds with 7 queries