Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 07-22-2012, 12:03 AM
JCSizemore JCSizemore is offline
LawnSite Member
 
Join Date: Apr 2012
Location: South Dayton, Ohio
Posts: 3
Hydro pump

Hello, I have a 72" Hustler ZTR Super Z. I'm currently rebuilding the pump and would like the torque on the top plates four 13mm bolts holding valve plate down. I would appreciate any info, please.
  #2  
Old 07-23-2012, 01:19 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,755
E-mail me your model and serial # and I will email you the service manual for the pumps.

Pj
__________________
  #3  
Old 07-23-2012, 08:27 PM
JCSizemore JCSizemore is offline
LawnSite Member
 
Join Date: Apr 2012
Location: South Dayton, Ohio
Posts: 3
Hustler

Unfortunately the tag wasn't on the mower when I bought it. That tag sure would've made this job a lot easier. When I bought the mower from a guy going out of business, it had a bad motor and bad hydro pump motor, left side, which was already taken off of the machine. I have put another motor and new pump motor on and did some internet research for the torque. So far so good, maybe they could stamp the model and serial numbers on them somewhere. Thanks for getting back with me so quickly. If I have anymore problems with it, I'll get back to you about it. JC Sizemore
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 03:51 PM.

Page generated in 0.06431 seconds with 8 queries