![]() |
|
|||||||
| Hustler Turf Equip Lawn Mowers & Turf Care Equipment |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Seat Back detached
I have a super mini Z. Seat back came unaattached. Looks like there was some kind of caulk or glue holding it into position in the seat back pan. Can you tell me what it is so that I might reattaxh the seat back? Thanx.
|
|
#2
|
|||
|
|||
|
I have a call into the seat manufacture looking for the type of glue used. I sent a reminder this morning..
Brian O |
|
#3
|
|||
|
|||
|
Jim,
Do you have your model and serial number. My research has come up with several seats for the Super Mini Z throughout the years. Brian O |
|
#4
|
|||
|
|||
|
Thanks Jim,
I should have something today. Brian O |
|
#5
|
|||
|
|||
|
Jim,
Here is the type of glue and instructions on how to apply. hope this helps 3M DP8005 Clean unbonded area to remove debris. Wipe pan and cushion with isopropyl alcohol. Apply epoxy to unbonded area. Wrap a piece of masking tape to secure cushion to pan. Let cure/. Brian O |
|
#6
|
|||
|
|||
|
Seat
Thanks very much, Brian.
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 03:07 PM.
Forum Rules:
This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers