|
|
|
|||||||
| Hustler Turf Equip Lawn Mowers & Turf Care Equipment |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#2
10-14-2012, 04:56 PM
|
|||
|
|||
|
The bolt pattern should be the same on the two seats. I have never switched that seat onto a FasTrak and my only concern would be the width and making sure it fits between the fuel takes. Simple measurements at your dealers showroom should answer that question.
Brian O 
|
|
#3
10-15-2012, 01:22 PM
|
|||
|
|||
|
Yes you can. I have an X1 that came with a standard seat. I also have a FTSD. I installed the X1 seat on the FTSD with no issues. I purchased a deluxe suspension seat from Northern tool for around $400 and bolted it to the X1 with no issues. Same seat that hustler uses except it is black
jwt
|
|
#4
10-15-2012, 01:31 PM
|
|||
|
|||
|
There you have it! Thanks jwt,
Brian O
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 03:32 PM.
Forum Rules:
This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers
Hybrid Mode
