Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 12-05-2012, 07:02 PM
getdown getdown is offline
LawnSite Senior Member
 
Join Date: Jun 2012
Location: Florida
Posts: 257
Snapper W48120 w/Kaw FS460v Engine Replacement...

Hey Guys.

Question. So I've got an older snapper walk behind with the FS460v on it...as you probably know, this engine is no longer made. The engine has fine compression, but it's a pain to start up as the recoil assembly is lost (no replacement made that I've found) and probably has tons of hours on it...I've cleaned up the carb and when I get it going it runs strong. I've debated just getting a new engine for it (something cheap as it's my backup). The FS460v is a little bit underpowered anyways for a 48 inch deck, isn't it? 12.5HP? Thought it might be better to just buy something cheap and make it more reliable (it's still my backup), but if I got it running better I could keep more hours off my primary. I could keep the Kaw for something else later on...some project...or something that I use less often (like a log splitter or something).

But my question is, how do I know what engine works? Obviously I know it's a vertical mounted block...but do I only have to match up the shaft width/length or are there other factors? Any engine suggestions for a "bolt on" kind of swap...?

Thanks!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:50 PM.

Page generated in 0.05777 seconds with 7 queries