|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
12-29-2012, 01:39 PM
|
||||
|
||||
|
Kawi question
This past summer I bought a new John Deere QuikTrac 647 with a 22 hp kawi on it. Love the machine but on e oddity about it. After running a full throtle for a while, I have to let it sit at a low idle wait a good 4 minutes to shut it off or it will back fire. Now, I have a lot of experience with carbs amd such so I'm thinking its an adjustmest issue. Or is this the way the machine is supossed to run? Thanks
__________________
'84 F150 '84 Snapper Hi-Vac '12 Deere QuikTrak 647A 46" JRCO Thatcher JRCO Aerator Echo handhelds Makitia 4-sroke Backpack Sthil saws 
|
|
#2
12-29-2012, 04:05 PM
|
||||
|
||||
|
Now I have a lot of experience with carbs and such, so I'm thinking its not an adjustment issue. What are ya gonna adjust?
It more than likely is the anti-afterfire solenoid ( fuel solenoid) that is probably sticking open, or not seating , due to crud, etc. Pull the solenoid and check it out. You also wanna pull the shroud and make sure the head/cyl fins are clear of debris.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#3
12-29-2012, 04:09 PM
|
||||
|
||||
|
Ok. Ill check that. And as for adjustments, I have an '84 f150 with a carb and more pollution stuff in the world on it. With that the truck will run at a high idle for a while to clear the cylinders and such. It horrible. But anyways, I the pollution stuff on this engine and wasn't sure if it was in the same boat.
Posted via Mobile Device
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
