Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-25-2013, 10:22 AM
Blasko's Lawncare's Avatar
Blasko's Lawncare Blasko's Lawncare is offline
LawnSite Member
 
Join Date: May 2008
Location: Nazareth, Pennsylvania
Posts: 108
G6 blades for a Lazer Z

Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated.
Model Number:LZX27KC606
Reply With Quote
  #2  
Old 01-26-2013, 09:55 PM
Blasko's Lawncare's Avatar
Blasko's Lawncare Blasko's Lawncare is offline
LawnSite Member
 
Join Date: May 2008
Location: Nazareth, Pennsylvania
Posts: 108
Bump, anybody's response is greatly appreciated!
Reply With Quote
  #3  
Old 01-26-2013, 10:05 PM
Blasko's Lawncare's Avatar
Blasko's Lawncare Blasko's Lawncare is offline
LawnSite Member
 
Join Date: May 2008
Location: Nazareth, Pennsylvania
Posts: 108
Here's a pic of my new mower
Attached Images
 
Reply With Quote
  #4  
Old 01-27-2013, 01:26 AM
Schrock Lawns's Avatar
Schrock Lawns Schrock Lawns is offline
LawnSite Senior Member
 
Join Date: Nov 2010
Location: virginia beach va
Posts: 947
Jack small engine I think might have them theirs sponsors on this site who might have them also try ebay
Posted via Mobile Device
Reply With Quote
  #5  
Old 01-27-2013, 06:42 AM
Richard Martin's Avatar
Richard Martin Richard Martin is offline
LawnSite Fanatic
 
Join Date: Mar 2000
Location: Greenville, NC
Posts: 14,490
Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.
__________________
Serving Greenville, Winterville and Ayden NC



Reply With Quote
  #6  
Old 01-27-2013, 08:47 AM
weaver weaver is offline
LawnSite Bronze Member
 
Join Date: Sep 2009
Posts: 1,135
Quote:
Originally Posted by Richard Martin View Post
Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.
Newer Lazer's have a 15/16 in center hole...

Last edited by weaver; 01-27-2013 at 08:52 AM.
Reply With Quote
  #7  
Old 01-27-2013, 08:51 AM
weaver weaver is offline
LawnSite Bronze Member
 
Join Date: Sep 2009
Posts: 1,135
Quote:
Originally Posted by Blasko's Lawncare View Post
Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated.
Model Number:LZX27KC606
I just used the Exmark # and typed it in Ebay's search engine and here's what they have...


http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
Reply With Quote
  #8  
Old 01-27-2013, 09:26 AM
Blasko's Lawncare's Avatar
Blasko's Lawncare Blasko's Lawncare is offline
LawnSite Member
 
Join Date: May 2008
Location: Nazareth, Pennsylvania
Posts: 108
Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103...item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.
Reply With Quote
  #9  
Old 01-27-2013, 09:35 AM
weaver weaver is offline
LawnSite Bronze Member
 
Join Date: Sep 2009
Posts: 1,135
Quote:
Originally Posted by Blasko's Lawncare View Post
Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103...item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.
Those will fit.. newer lazers have 15/16 in center and that's the correct length also... Go to exmark.com quick refrence parts and cross #s....
Posted via Mobile Device
Reply With Quote
  #10  
Old 01-27-2013, 10:18 AM
Blasko's Lawncare's Avatar
Blasko's Lawncare Blasko's Lawncare is offline
LawnSite Member
 
Join Date: May 2008
Location: Nazareth, Pennsylvania
Posts: 108
Ok so I found the blade number and there aren't any G6's made that match up with it,the difference is the g6's are 20 3/4 while the ones I need are the 20.5 and my next and final question is whats the difference between the normal gators and the g6's, are the gators worth it?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:50 PM.

Page generated in 0.08898 seconds with 8 queries