Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Password
Home Products Find a Dealer News About Us Contact Us Mark Forums Read


Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2013, 12:20 PM
bsparr bsparr is offline
LawnSite Member
 
Join Date: Jun 2004
Location: McKinney, TX
Posts: 6
Honda 24 Starter Issue

I am having issues with the starter on my 24hp Honda. The gear on the starter occasionaly will not line up with the fly wheel. I have had the mower at the shop and they have tried replacing the starter but that did not resolve the issue. About 1 out of 3 tries the starter gear will hit the bottom of the fly wheel because the gears will not line up. Any suggestions.
Reply With Quote
  #2  
Old 03-22-2013, 08:01 AM
Downunder Bob Downunder Bob is offline
LawnSite Member
 
Join Date: Jun 2004
Location: Queensland
Posts: 110
Mine did the same thing.
I changed the starter and found it wasn't't long before it wouldn't't engage properly so I tried a little "Morey's" oil on the gear and shaft.
If you have never heard of it, it's a very heavy and sticky oil additive.
Any heavy gear oil should work but remember don't use too much just a couple of drops.
For some reason "Morey's" worked better than grease, not sure why but so far so good.

Cheers
Rob
Reply With Quote
  #3  
Old 03-23-2013, 08:17 PM
starlifter-fe starlifter-fe is offline
LawnSite Member
 
Join Date: Mar 2013
Posts: 2
My Honda GXV530 did exactly the same thing, and it was the starter solenoid. Strangely enough, the starter winding are initially energized at less than full voltage until the solenoid has pulled the pinion gear COMPLETELY into the flywheel teeth, and only then applies full voltage for cranking! This spins the pinion gear just enough to help it mesh with the flywheel, but not enough to grind it against the stationary flywheel! The voltage at the starter winding is initially reduced by momentarily running it in series with 1/2 of the solenoid's coil, but is then connected by the solenoid directly to the battery for cranking at full power. (Explanation courtesy Denso Corporation Japan)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:12 PM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.05887 seconds with 7 queries