Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2013, 06:32 PM
Gilmore.Landscaping's Avatar
Gilmore.Landscaping Gilmore.Landscaping is offline
LawnSite Senior Member
 
Join Date: Apr 2011
Location: Ontario
Posts: 633
Running 36" Mower with one blade??

So our client is looking to have the edge of her wood chip walkwaking trails cut back so there is more room to walk. The trails slope off on the outside and so I can only use about half the deck to cut with while the other half is over the wood chips sucking them under the deck and doing lots of damage.

Thus my question, can I run the mower with just one of the two blades on the mower or will that cause some kind of imbalance.
__________________
Truck, Mower, Trimmer, Blower.....same as everyone else.
Reply With Quote
  #2  
Old 07-15-2013, 06:45 PM
exmarkking's Avatar
exmarkking exmarkking is online now
LawnSite Senior Member
 
Join Date: Mar 2008
Location: North Georgia
Posts: 896
Why not a 21" or trimmer?
Reply With Quote
  #3  
Old 07-15-2013, 06:53 PM
blk90s13 blk90s13 is offline
LawnSite Bronze Member
 
Join Date: Sep 2005
Location: Howell,NJ
Posts: 1,445
Just use a trimmer ?
__________________
God bless the USA

Lots for sale
http://www.ebay.com/sch/approvedjdm/...&_trksid=p3692

Reply With Quote
  #4  
Old 07-15-2013, 07:08 PM
Porcupine Lawn and Snow's Avatar
Porcupine Lawn and Snow Porcupine Lawn and Snow is offline
LawnSite Senior Member
 
Join Date: Jul 2013
Location: Ontario, Canada
Posts: 313
Just use a 21, 30 or 32.
Ontario!
__________________
You know, the usual stuff and more...
Ontario, Canada


Reply With Quote
  #5  
Old 07-15-2013, 08:02 PM
Gilmore.Landscaping's Avatar
Gilmore.Landscaping Gilmore.Landscaping is offline
LawnSite Senior Member
 
Join Date: Apr 2011
Location: Ontario
Posts: 633
So the weeds/grass is like 3' tall and really thick, I think our 21 would struggle and stall out alot.

My backup plan is a trimmer with one of those steel brush cutter blades, but I was hoping to find a faster way since there is like 2500 lin ft.
Reply With Quote
  #6  
Old 07-15-2013, 08:13 PM
StanWilhite StanWilhite is offline
LawnSite Bronze Member
 
Join Date: Apr 2010
Location: Decatur AL
Posts: 1,522
I'd say take a blade off and see how it sounds and feels....you should be able to tell if everything's ok.
__________________
Shut 'er down Buford....she's slangin' oil !!!!
Reply With Quote
  #7  
Old 07-15-2013, 08:32 PM
Greg78's Avatar
Greg78 Greg78 is online now
LawnSite Bronze Member
 
Join Date: May 2008
Location: Southwest, FL
Posts: 1,841
Should be fine. I've ran a mower for a whole pass around the property before with one blade missing as I had forgot to tighten the bolt. Didn't feel any different.
Reply With Quote
  #8  
Old 07-15-2013, 09:07 PM
mowisme mowisme is online now
LawnSite Senior Member
 
Join Date: Apr 2007
Location: Fitchburg, Wisconsin
Posts: 748
just a thought.. most likely dumb one- what about turning the blade up-side down on the side over mulch bed? It could also be raised to highest position if uses spacers. Not sure if curved back lip facing down would stop the suction though.
Reply With Quote
  #9  
Old 07-16-2013, 09:51 AM
Valk's Avatar
Valk Valk is offline
LawnSite Silver Member
 
Join Date: Dec 2007
Location: Eastern KS
Posts: 2,709
Quote:
Originally Posted by mowisme View Post
just a thought.. most likely dumb one- what about turning the blade up-side down on the side over mulch bed? It could also be raised to highest position if uses spacers. Not sure if curved back lip facing down would stop the suction though.
You'll still get downward turbulence blowing the chips around...not to mention that the wing will be spinning around at a lower height than the usual cutting height of the edge.
__________________
---------------------------------------------------
~ cut it high ~ let it fly ~
---------------------------------------------------
Some folks are so contrary that if they fell into a river,
they'd insist on floating upstream.
~ Josh Billings
Reply With Quote
  #10  
Old 07-18-2013, 12:38 AM
herler herler is online now
LawnSite Silver Member
 
Join Date: Apr 2012
Posts: 2,722
Just take the 21" and go slow, they don't struggle so long you're taking your time, it's not that big of a deal, won't take but 5 or 10 minutes and done.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:14 PM.

Page generated in 0.07987 seconds with 7 queries