Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 12-05-2013, 12:44 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Winter run down - lots of stuff - lots of pics

Selling a ton of stuff as we modify our business plan
484-880-068four - my name is chip and phone calls are preferred vs texting

Start with the little stuff

- stihl br600 x3 - $350, 300, and 250 based on age 2006-2010. All work great but the oldest has the top loop broken off on the backboard. Looking to sell 2 and replace them with redmax/husqvarna blowers for leaves. These are great blowers. Light and pretty easy on fuel with lots of power but the stats say redmax moves more air so we are giving them a shot

- echo 280 bed redefiner with trimmer head also $500. very little use, new carb

- gravely ocdc that fits 52 and smaller decks $175

Bigger stuff

- 2007 scag turf tiger 27/61 velocity deck $3500 under 2000 hours

- 2001 scag turf tiger 25/61 1/2 year advantage deck with ultracut style baffling $3000 under 2000 hours

- 2010 hustler super z 31/60 with triple bagger $6500 1300 hours and in good shape. pic shows small tires but it will come with the stock size 24x12x12 with good tread

- 2012 gravely new style pro stance 22/52 (24hp old rating) with very low hours and in excellent condition $4800

- 2013 gravely proturn 24/60 $5400 very low hours and in excellent condition

- 2013 gravely proturn 272 27/72 $8500 under 100 hours and in excellent condition

- 2004 husqvarna 27/61 ztr hasn't been used in years but engine was good when parked. Jerky hydros were the problem that stopped us from using it. $2000 obo

- exmark 48 inch belt drive walk behind with seized engine (14hp kawi I think). Has a peerless 5 speed trans so I believe it to be mid90's $250

- snapper 15/36 hydro walk behind with ergonomic controls and bagger $1000 excellent condition

- yazoo kees 18/48 ztr $1000 needs ignition and pan gasket replaced

- encore prowler front mount 60inch. We used the 22hp kohler to re-power a miniskid so it needs a motor or good for parts. Hydros, clutch, etc were all functioning perfectly $600

- lesco z2 25/60 parts machine. $500 has engine, pumps, and deck but we stole the wheel motors, seat, and tires for other machines over the years. About 1000 hours on the meter

- scag 3-wheel rider belt drive been sitting for years and needs miscellaneous parts and a tire or two $250 2500 hours on the meter 18hp kohler magnum


trucks

- 99 dodge cummins 4x4 quad cab 150k $10,000 firm

- 94 dodge 250 with fisher plow rusted out rear truck frame $1500 firm

- 00 gmc sierra 2500 6.0 4x4 160k $7500 firm -

- dumper dogg insert new this year for $2500 firm with cab protector and board pockets

- 78 international loadstar dt466 5+2 10ft dump $3500 firm

- 78 f350 mason dump needs ring and pinion (pinion shaft broke). Good 400m with np235. good rubber $1800

- 79 c30 gmc with 8ft all steel dumping stake needs fuel line replaced and misc little stuff $1500 350 4spd

- 99 f250 superduty 5.4 auto 2wd high miles (285k) runs great $2700

pics to follow as time permits
Reply With Quote
  #2  
Old 12-05-2013, 12:46 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Beginning of pics - list of snow plows and leaf loaders to follow later today when I find time
Attached Images
File Type: jpg unnamed.jpg (52.1 KB, 979 views)
File Type: jpg unnamed (1).jpg (57.3 KB, 969 views)
File Type: jpg unnamed (2).jpg (36.7 KB, 961 views)
File Type: jpg unnamed (4).jpg (64.9 KB, 959 views)
File Type: jpg unnamed (5).jpg (56.1 KB, 954 views)
File Type: jpg unnamed (10).jpg (47.0 KB, 954 views)
File Type: jpg unnamed (11).jpg (64.8 KB, 953 views)
File Type: jpg unnamed (13).jpg (32.1 KB, 963 views)
Reply With Quote
  #3  
Old 12-05-2013, 12:48 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
extra truck 96 f350 4x4 cab and chassis with electric hoist 460 auto needs work - see my other threads $2500 firm with good rubber
Reply With Quote
  #4  
Old 12-05-2013, 12:50 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
found a few more pics - back to work now
Attached Images
File Type: jpg unnamed (8).jpg (47.4 KB, 963 views)
File Type: jpg unnamed (14).jpg (53.5 KB, 957 views)
File Type: jpg unnamed (12).jpg (42.4 KB, 952 views)
File Type: jpg unnamed (17).jpg (56.4 KB, 956 views)
Reply With Quote
  #5  
Old 12-05-2013, 03:49 PM
vaacutabove vaacutabove is offline
LawnSite Senior Member
 
Join Date: Jul 2010
Location: forest va
Posts: 960
any more info on the GMC. any rust I know its bad up there.
Reply With Quote
  #6  
Old 12-05-2013, 05:10 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Gmc has the weird surface rust that they all seem to get on the frame but nothing substantial. It was a 1 owner before me and we bought it this spring from a customer who used it to commute and for hunting. The bed has a dent in the right rear from him backing into a tree that I'll get pics of - we may have it fixed - the rest of the body and I terror are flawless without so much as a scratch or ding.
Posted via Mobile Device
Reply With Quote
  #7  
Old 12-05-2013, 05:41 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
*interior
Posted via Mobile Device
Reply With Quote
  #8  
Old 12-06-2013, 09:35 AM
crevinalandscapingllc's Avatar
crevinalandscapingllc crevinalandscapingllc is offline
LawnSite Member
 
Join Date: Jan 2013
Location: West Milford NJ
Posts: 222
Bummp for good deal on that cummins
__________________
-Crevina Landscaping LLC. West Milford,NJ
www.crevinalandscaping.com
18 years old and fully licensed and insured
1995 Ford 7.3L powerstroke dump
1997 Ford 7.3L powerstroke dump
2005 Ford F350 powerstroke w/ fisher mm2
1986 Case Skidsteer
1999 Daewoo 1785L skidsteer
Belmar 7x18 Equipment
Lark 8x18 enclosed
Belmar 6x14 open
Wright Sentar Sport RH & Stander
Everride Hornet ZTR
Honda push mowers
Redmax backpacks, trimmers, and handhelds
Dolmar chainsaws
Reply With Quote
  #9  
Old 12-06-2013, 12:17 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Quote:
Originally Posted by crevinalandscapingllc View Post
Bummp for good deal on that cummins
Thanks man,
Here's some of the leaf stuff

- billly goat 14/18 leaf loader - same dimensions as the 18hp vanguard but powered by a 14hp subaru. We bought it because the price was a few hundred cheaper than the 18hp and the subaru engine would be cheaper to replace. It has the pirahna blade and the serrated impeller. We fitted a tailgate hanger to it from an older unit that shows some age but it's handy to be able to hang on a barn door setup. Great unit $1750 2 years old. 10 inch by 10 foot suction hose and we have an extra height extension for the discharge that's never been installed

- giant vac towable leaf loader with wisconsin engine. Not sure on the hp but I think it's 19hp and some ridiculous amount of torque. This has a 10 inch intake and 7 inch discharge with a very deep impeller that flows a ton of air. Engine runs perfect and impeller is near perfect. This was privately owned before we bought it and was our spare - only used a couple times. I took pics of the impeller to show the limited use. $1500

- billy goat 10hp leaf loader. 8 inch by 12 foot vacuum hose with 5-6 inch discharge. New engine a few years back that runs great still but the impellar shows wear and should be replaced for more suction and finer shredding $500 firm

- 2 giant vac 10-11 hp leaf loaders. 1 has a suspected good engine that needs a pullstart and the other has a better impeller and housing $500 for both

- 2 8hp giant vac push blowers with good engines that havent been used for a couple years. Both fired over and ran a few seconds on a shot of starting fluid but that's all the time I put into them this year. $500 for both - assume a carb or two and at least one or two tires to make them both fully operational. Will sell 1 for $300 your choice

- 8hp little wonder blower needs pull start and tires $225 - assume it needs a tuneup too but I wrapped a cord around the recoil and it fired over with 1 pull and a shot of starting fluid

- 5hp little wonder blower needs pull start - has newer engine $200
Attached Images
File Type: jpg unnamed (22).jpg (41.6 KB, 340 views)
File Type: jpg unnamed (23).jpg (36.2 KB, 334 views)
File Type: jpg unnamed (25).jpg (12.9 KB, 331 views)
File Type: jpg unnamed (26).jpg (15.9 KB, 333 views)
File Type: jpg unnamed (28).jpg (34.1 KB, 332 views)
File Type: jpg unnamed (38).jpg (33.6 KB, 331 views)
File Type: jpg unnamed (39).jpg (52.0 KB, 330 views)
File Type: jpg unnamed (34).jpg (29.3 KB, 331 views)
Reply With Quote
  #10  
Old 12-06-2013, 09:36 AM
Townhouse Yards's Avatar
Townhouse Yards Townhouse Yards is offline
LawnSite Senior Member
 
Join Date: Jun 2013
Location: Vienna, VA
Posts: 417
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:28 AM.

Page generated in 0.10532 seconds with 8 queries