Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 07-04-2014, 02:14 PM
LCharlier LCharlier is offline
LawnSite Member
 
Join Date: Oct 2008
Location: Lafayette, LA
Posts: 2
Instructions for replacing deck belt on Super Z

I have a 2007 Super Z with 60" XR7 deck and I need to replace the deck belt. The belt has never been replaced and is now showing signs of severe wear. I have purchased a replacement belt but before I go ahead and attempt to change it, I want to make sure I do it right. I have the belt diagram but the manual doesn't say how to go about changing the belt (what steps in what order). Can someone share with me the correct step-by-step procedure for replacing the deck belt? Thanks in advance for any-and-all assistance...
  #2  
Old 07-07-2014, 11:41 AM
hustlermidwest hustlermidwest is offline
LawnSite Senior Member
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 635
If you go to our website at hustlerturf.com on the bottom of the page is a link to manuals. Find your model number and download the manuals. You'll see how to change the belt and adjust it. Keep in mind you'll need to re adjust the belt after a couple of mowings. New belts stretch when first installed.

Brian O
  #3  
Old 07-08-2014, 07:18 AM
puppypaws's Avatar
puppypaws puppypaws is offline
LawnSite Fanatic
 
Join Date: Jul 2004
Location: Marshville,NC 28103
Posts: 7,882
Quote:
Originally Posted by hustlermidwest View Post
If you go to our website at hustlerturf.com on the bottom of the page is a link to manuals. Find your model number and download the manuals. You'll see how to change the belt and adjust it. Keep in mind you'll need to re adjust the belt after a couple of mowings. New belts stretch when first installed.

Brian O
This is a prime example of how things are different for people...I've owned 6 Hustler Super Z mowers since 2004, and never once have I found the need to adjust a deck belt at any time. I've had a stick damage a deck belt of which I replaced, and have replaced maybe 4 hydraulic belts of which the deck belt must be freed to change, but not once have I ever found the need to tighten a deck belt. Evidently my deck belt tensioner spring mechanism has done an extremely good job.

To reiterate, when I did the complete restore on my 2006 Hustler Super Z in the later part of the cutting season in 2012, I replaced everything, including all belts, hoses and wiring. This mower now has 160 hrs. since the rebuilt and the deck belt has never been touched, and if I tried to tighten the belt, I may possibly gain one more link on the adjusting chain, and then again, I may not.
__________________
Farm Mower
  #4  
Old 07-08-2014, 10:37 AM
hustlermidwest hustlermidwest is offline
LawnSite Senior Member
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 635
Puppy,
Measure the deck belt idler spring. See if it falls in line with our specs. Keep it's length within our specs and you'll get even longer life.

Brian O
  #5  
Old 07-08-2014, 04:10 PM
puppypaws's Avatar
puppypaws puppypaws is offline
LawnSite Fanatic
 
Join Date: Jul 2004
Location: Marshville,NC 28103
Posts: 7,882
Quote:
Originally Posted by hustlermidwest View Post
Puppy,
Measure the deck belt idler spring. See if it falls in line with our specs. Keep it's length within our specs and you'll get even longer life.

Brian O
I've got a method, and if I've never had one seconds problem in thousands of hours except for one stick causing minor damage, I'm assuming it works. Anytime I need to loosen a deck belt to replace a hydraulic belt; when I tension the deck belt I take Vice-Grip pliers and pull the spring to it furthest point my strength will allow and insert that link into it's lock point.

My strength must be pretty well calibrated, the specs call for 9.3" to 10.3" and both my mowers (66" & 72") measure exactly 9.5".
__________________
Farm Mower
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 11:03 PM.

Page generated in 0.07590 seconds with 7 queries