Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 10-15-2000, 02:16 AM
The Rocket The Rocket is offline
LawnSite Member
 
Join Date: Oct 2000
Location: St. Paul, MN
Posts: 5
I have been in the lawn maintenance industry for many years and I am interested in getting into irrigation. How did all of you learn how to properly install irrigation systems? Are there any instructional videos, classes, books, etc. that would show me the entire process? I would appreciate all of the knowledge you can share with me.
Thanks
The Rocket
Reply With Quote
  #2  
Old 10-16-2000, 09:49 PM
Dennis Dennis is offline
LawnSite Member
 
Join Date: Jan 2000
Location: Ga.
Posts: 155
Rocket
I have just started to get into this area, looks as if this is not an easy do it yourself teaching thing,lots of things to consider to be good.
I am breaking in just as repair and maint. of existing
Systems, This in it's self is a good income producer.
But if you are determined to jump in, the library has many good books, and rain bird has a leaflet that will walk you through the set up,also the best place to look is on the web. whatever you decide , goodluck.
Dennis
Reply With Quote
  #3  
Old 10-16-2000, 10:04 PM
LoneStarLawn LoneStarLawn is offline
LawnSite Bronze Member
 
Join Date: Feb 2000
Location: San Antonio, TX
Posts: 1,415
License!!

I also believe there is another license that you need to install irrigation systems..do to backflow
__________________
<i>Alan</i>
Reply With Quote
  #4  
Old 10-17-2000, 02:47 PM
The Rocket The Rocket is offline
LawnSite Member
 
Join Date: Oct 2000
Location: St. Paul, MN
Posts: 5
Thanks for the replies. How do I go about getting a license? Is there some type of course? Who would I call to get this information?
Thanks
The Rocket
Reply With Quote
  #5  
Old 10-18-2000, 01:06 AM
LoneStarLawn LoneStarLawn is offline
LawnSite Bronze Member
 
Join Date: Feb 2000
Location: San Antonio, TX
Posts: 1,415
You live in MN correct?

If so then check here http://www.bizlinks.state.mn.us/license.html

I hope you find it here...
__________________
<i>Alan</i>
Reply With Quote
  #6  
Old 10-20-2000, 10:40 AM
gusbuster's Avatar
gusbuster gusbuster is offline
LawnSite Bronze Member
 
Join Date: Mar 2000
Location: Sunny Northern California, San Francisco Bay Area
Posts: 1,618
Give credit where credit due.

Home Depot, if available has seminars, at least in my area of Califonia on the do's and don't's of irrigation. You might want to check there. I've been doing installs for over 20 years, I was inpressed by the class. I went to the seminar to see anything new in installing.

On the contractor liscense and learning, go work for somebody else a couple projects. See if a local contractor will sponser you. Experience is the best teacher.
John
__________________
J-LC Landscaping & Maintenance Gardening
C-27 CA. Contr# 770044
Reply With Quote
  #7  
Old 10-24-2000, 12:08 AM
treeman treeman is offline
LawnSite Member
 
Join Date: Sep 2000
Location: Church Hill, Tenn.
Posts: 1
irrigation

here in Tenn. you do not have to have a seperate license to install irrigation but you must get certified to install a backflow preventor on you irrigation systems. we just sub out a certified plumber to install the backflow. not hard to do residential systems once you see how they are put together. we use rainbird equipment have hd very good success. they have an excellent website at http://www.rainbird.com if i can help feel free to contact me at caneyvalleynursery@chartertn.net
Reply With Quote
  #8  
Old 11-13-2000, 03:56 PM
jeffyr's Avatar
jeffyr jeffyr is offline
Registered User
 
Join Date: Jun 2000
Location: Northern NJ
Posts: 876
I purchased a book on designing irrigation systems and then installed one at my home. In NJ , however, I think you need to take courses, apprentice, and get a license (all of this takes a few years from what I understand)

jeffyr.

Reply With Quote
  #9  
Old 11-17-2000, 02:05 AM
KindGardener KindGardener is offline
LawnSite Member
 
Join Date: Sep 2000
Location: Huntington Beach, CA
Posts: 186
Instructructional info, aids....

Wouldn't you think that a mfr would want us to get trained to use & specify THEIR products?

I find myself in probably a very similar place as The Rocke (orig post) - new, and not knowing a precipitation rate from a transpiration rate from gph to ymmv (you get the idea)

I've installed 3 systems - a complete 4 circuit automatic, a retrofit, and a low-flow/drip system. DAMN they took a LONG time! Something to be said for learning about the "tricks".... like "allow adequate spacing on the manifold" so the valves can screw on... (If you've never screwed up that one, I suppose you will!)

Today I just ordered to manuals from Rainbird - their LO FLOW Irrigation (drip) Manual, and their Complete Irrigation Manual.

They are apparently each about 100 pages, & cost around 11 buck for both, incl shipping. I didn't gripe about the cost, it's probably about what it costs them to print it.

Now, I wanted to get their Instructional Viedo & workbook, but they are in 5 modules at 30 bucks EACH. I'll try my local irrigation distributor & see if they have one to loan out (now THAT is a good Idea, no?)

Good luck.

Reply With Quote
  #10  
Old 12-06-2000, 02:29 PM
smithsonmi smithsonmi is offline
LawnSite Member
 
Join Date: Aug 2000
Location: Cumming, GA
Posts: 75
great online reference

Go to http://www.jessstryker.com
__________________
Jim S.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:21 PM.

Page generated in 0.10495 seconds with 7 queries