Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 11-11-2004, 09:27 PM
alpine692003's Avatar
alpine692003 alpine692003 is offline
LawnSite Bronze Member
 
Join Date: Dec 2003
Location: Vancouver, BC
Posts: 1,502
Tweaking your EB630 BPB

How do you guys tweak your 630 to make it more powerful if possible?

Take out the screen arrester?
Reply With Quote
  #2  
Old 11-11-2004, 09:44 PM
UNISCAPER UNISCAPER is offline
LawnSite Bronze Member
 
Join Date: Dec 2002
Location: Encinitas, Ca. 92024
Posts: 1,426
First and foremost....Square off the intake a exhaust ports, taking a 90° sided file and adding more area to the space that the gas will enter and leave the cylinder. Second, I think the 630 is a simple piston port design, meaning if you want even more gas to enter the cylinder, you can file a square chute, the width of the intake port about 40 thousands of an inch into the top of the piston. This will allow the gas to enter in sooner and it will suck more into the combustion chamber. Then, look with a micro mirror, into the intake and exhaust passages to make sure all gaskets are trimmed even with the metal castings. At the same time, look for metal casting lines that can cause fuel and gas to hang up. Take a Dremel and kncok them down to the other side of the port. After that is done, polish the port so it shines. This will allow gas to enter and leave faster.

Then we have the illustrious muffler system. Take it off and install an small expansion chamber, it will kind of look like a two reverse cones welded together, and use a small silencer on the discharge pipe.

This should give you an additional 1500 RPM's and am HP gain of 25%, however, tweeking the ports wil make the engine run on a power band, and, it will bog until you hit that band. We have a 630 in a 4' long 1.5' long RC model of Miss Budweiser and these modificatons allowed the boat to run from the 50MPH it did to 62MPH it does now.
__________________
Bill Schwab
Naturescape Landscape Co.
Encinitas, Ca. 92024
www.naturescapelandscape.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 06:25 PM.

Page generated in 0.06102 seconds with 7 queries