Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-01-2005, 08:57 PM
97firebird's Avatar
97firebird 97firebird is offline
LawnSite Member
 
Join Date: May 2004
Location: Oxford, CT
Posts: 41
kohler giving me hell

Oh, here is my problem..still....My 1992/3 Kohler Magnum 20hp motor has been blowing oil out of the PCV valve like crazy and leaking out of the valve cover gaskets...This past spring we rebuilt the following....pistons, rings, honed cylinders, valve job, valve clearance, etc. all new gaskets, new breather plate, breather gasket, and checked the oil pressure regulator. I am sure that I have the correct oil level and viscosity in the motor. All of this still did not solve the problem, although the motor runs beautifully now. Could it be valve seals (There are only valve seals on the intake valves, which I replaced, but have not run the motor with them in yet)? Valve guides? Have yet to check them but I have the specs...It seems as though the crankcase is becomming too highly pressurized and/or filling the valve area up and forcing oil out of the PCV. I have had it with this motor so any help would be greatly appreciated. Thank You
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:39 PM.

Page generated in 0.08545 seconds with 8 queries