Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 08-24-2005, 09:27 AM
Sean Adams Sean Adams is offline
 
Join Date: Jun 1999
Location: Pennsylvania
Posts: 3,622
Tip Of The Day - 8/24/05 - Pruning

Large tree branches should be pruned using a 3 step process to avoid stripping the bark from the tree trunk as the branch falls away

1 - use a pruning saw and make a small, shallow cut through the bark on the underside of the branch several inches from the trunk

2 - starting at the top side of the branch and a few inches farther out than your undercut, cut all the way through the branch

3 - make a final clean cut to remove the stub; make the cut just outside the branch collar, the swollen area where the branch joins the trunk
Reply With Quote
  #2  
Old 08-25-2005, 06:14 PM
Critical Care's Avatar
Critical Care Critical Care is offline
LawnSite Bronze Member
 
Join Date: Nov 2003
Location: Central Oregon
Posts: 1,654
Amen. Unfortunately what happens is that a lot of us are trying to prune off large limbs with a small pruning saw while standing on top of a wobbly ladder. Hey, it's not always an easy job, and it can take us what seems like eternity to cut through large branches. So instead of doing things right, we opt to take short cuts. We make one cut, while grunting and groaning even with that. The limb cracks and falls down to the ground but along with it a long strip of bark also tears off, leaving a bad looking wound in the tree. "Oops!" But that surely is what will happen if you don't follow the steps as Sean pointed out... as painful as it may be.
Reply With Quote
  #3  
Old 08-27-2005, 08:04 PM
lampeslawnservice lampeslawnservice is offline
LawnSite Senior Member
 
Join Date: Mar 2004
Location: Burlington, Ia
Posts: 323
Be careful on those ladders. Just picked up a new client whose husband was a general contractor that fell off a roof or ladder did not get specifics and broke his neck. He's no longer with us.
Also limbs trimmed under 1/2" in diameter will do much less damage to the plant than anything larger.
Reply With Quote
  #4  
Old 09-03-2005, 09:07 PM
GFTC GFTC is offline
LawnSite Member
 
Join Date: Sep 2004
Location: Kansas City
Posts: 104
Or.....call a Certified Arborist.
Reply With Quote
  #5  
Old 09-03-2005, 09:30 PM
DLS1's Avatar
DLS1 DLS1 is offline
LawnSite Bronze Member
 
Join Date: Jun 2002
Location: Kansas City, Mo. area
Posts: 1,620
Forget the pruning saw. Use a chain saw or long handle pole chain saw.
__________________
Have a Great Day.
Life is too short for a bad day.

Bill
Reply With Quote
  #6  
Old 09-03-2005, 10:52 PM
sildoc's Avatar
sildoc sildoc is offline
LawnSite Silver Member
 
Join Date: Jun 2003
Location: Eagle Point, Oregon
Posts: 2,721
Quote:
Originally Posted by DLS1
Forget the pruning saw. Use a chain saw or long handle pole chain saw.
Exactly. Larger trees are more forgiving of a power saw than the small trees. Same senerio but using a power saw.
Good tip.
__________________
What ever I do I must do it right!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:13 PM.

Page generated in 0.08501 seconds with 9 queries