|
#41
|
||||
|
||||
|
It's just a matter of your preference. Personally I don't like to buy used (anything), so I would go with the GT5000. Craftsman should have enough power to get you up the slope easily.
__________________
Cheers to Beers
|
|
#42
|
||||
|
||||
|
John Deere has the John Deere promise, where if you buy a mower and you don't like it for any reason for 90? days, you can bring it back for a full refund or trade it (for what you paid for it) towards a different model.
I was offered a L-110 for $1200 back about 4 months ago. It only had 5 hours, the dealer said something about the owner didn't like the hydrostat and traded it using the JD Promise in on a gear drive. It listed for $1499 new.
__________________
2004 Ford F-250 XL RC/LB 4x2 Power Stroke Diesel 2010 John Deere Z710A 48" cut 1999 John Deere GT-235/54" deck 1985 John Deere 212 w/38" deck 1983 John Deere 420 w/54" hydraulic front blade 1974 John Deere 140, 54" hydraulic blade, 3pt. hitch, tandem disc, plow, 48" deck 1971 John Deere 112, 38" deck, all original, down for engine rebuild. 1967 IH Cub Cadet 124 w/creeper box, disc, plow 1947 Economy/Power King Tractor S/N 590, fully restored. Certified John Deere Technician |
|
#43
|
|||
|
|||
|
Quote:
|
|
#44
|
||||
|
||||
|
Quote:
I will just say that if you have a good local dealer, you won't be disappointed, but if your dealer is not good, then see if you can find another one. There are good ones and there are bad ones. If you have a breakdown on a Craftsman and you go into Sears looking for parts, you will run into a bunch of people who will scratch their heads and give you buttkiss. If you have a breakdown with a John Deere, and you go to your dealer and tell them what is wrong, they will at least be able to give you a good idea of what's wrong and what will fix it, and how much it will cost. Also the parts can be gotten overnight if necessary and if your dealer is good, they should provide you a loaner if you have them work on yours. Sears can't touch that kind of product support.
__________________
2004 Ford F-250 XL RC/LB 4x2 Power Stroke Diesel 2010 John Deere Z710A 48" cut 1999 John Deere GT-235/54" deck 1985 John Deere 212 w/38" deck 1983 John Deere 420 w/54" hydraulic front blade 1974 John Deere 140, 54" hydraulic blade, 3pt. hitch, tandem disc, plow, 48" deck 1971 John Deere 112, 38" deck, all original, down for engine rebuild. 1967 IH Cub Cadet 124 w/creeper box, disc, plow 1947 Economy/Power King Tractor S/N 590, fully restored. Certified John Deere Technician |
|
#45
|
|||
|
|||
|
Due to a series of turns and twists in my quest for the "perfect" lawnmower for my needs, I've about decided on the Cub Cadet LT1050. Hopefully no horror stories out there about this one...lol.
|
|
#46
|
||||
|
||||
|
Quote:
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|




Cheers to Beers 






Linear Mode
