search sponsored by:
Advanced Search

The Green Industry's Resource Center

Thread Tools   Display Modes
Old 04-03-2001, 10:26 PM
lawnboy82 lawnboy82 is offline
Join Date: Jan 2001
Location: westchester county, N.Y.
Posts: 957
probably your cheapest way to go is:
if you have mostly larger trees, like 18" dbh or bigger
dbh- diameter breast height. something like oak, maple, ash, hickory, a lot of stuff you may be better off getting a saw mill guy in there, see what he will pay you for the wood once it is cut. then pay a company to go in and cut your trees for you and clear the brush. tell them to leave the trees in 20' lengths or whatever.
cause think about it like this. i use stihl chain saws.
they are the best but also the most expensive. if i was you i would get like an 029 which is just over 300 dollars. then may also want like an 044 or larger which is gonna be at least 700 dollars and can run up to over 1600. depending on what size trees you have. now also if you have a 2 foot chain saw in theory you can cut a 4 foot tree. really more like a 3 1/2 footer. but if you go and sell that to a mill they will come and get it and pay you. so that may be your best bet.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:10 AM.

Page generated in 0.05623 seconds with 10 queries